Women One-Piece Sleeve Basic Pattern Calculator

Instructions for using the pattern calculator:
* Add your measurements in the yellow cells from the "MEASUREMENTS" tab. The basic measurements needed for the pattern should be made by using the sketch from the same sheet and the measurement code (ex. A, B, C, etc.)
* Press button "Calculate"
* In the "RESULTS/INSTRUCTIONS" tab, the dimensions for the blocks will be computed automatically.
By following the steps from "RESULTS/INSTRUCTIONS" and the drawing you will be easily able to make your own pattern. Good luck!

Measurements	Code	Value [cm]
		FILL IN
Height:	A
Chest circumference:	B
Elbow length:
Measured segments
Back armhole width:
Front armhole width:
Garment measurements
Sleeve length:

Line	Value [cm]	Instructions
1-2	24.0
1-S3	12.0	Square down.
S3-F3	64.3	Square across.
S3-E3	36.1	Square across.
S3-B3	17.5	Square across.
		From points 1 and 2 square down until intersecting the horizontal line from point B3 and mark points 3 and 4 respectively.
1-5	5.5	Square right until intersecting line 2-4 and mark point 6.
5-A4	3.0
6-A6	3.5
3-7	5.0
7-A3	1.0
4-A5	5.0
3-B2	6.1
4-B7	7.1
F3-F7	15.6	Connect points B7-F7.
F3-F2	5.5	Connect points B2-F2.
		Use a curve to connect points B2-A3-A4-S3-A6-A5-B7 - this is sleeve cap.